ENDUROFRAME® Conference 2023 Key Information

Page Contents

A reminder to everyone that your competitors may be attending this event, so please be mindful of your obligations under the Competition and Consumer Act and avoid inappropriate discussions or sharing commercially sensitive information.

Conference Partners

Conference Venue

Melbourne Polytechnic Conference Centre

Address: Building U, 77 St Georges Road, Preston VIC 3072 [Open in Google Maps]

Conference Parking

Onsite parking has been arranged for ENDUROFRAME Conference attendees.

  • Enter the student car park via St Georges Road
  • Drive through to the top section of the student car park
  • Report to the parking attendant who will provide a parking permit
  • Park in designated space as directed by the attendant
  • Ensure the permit provided is clearly displayed in front window of vehicle
  • Proceed to Building U – Conference Centre

Cocktail Reception - Wednesday 22nd March

Event

Cocktail reception - drinks; finger food; and networking
Time 6:00 pm - 8:00 pm
Location

Downstairs Building U in the Ellen Smiddy Room

Melbourne Polytechnic Conference Centre

77 St Georges Road, Preston VIC 3072 

[Open in Google Maps]

Notes

Dinner is not organised but we’ve identified that Tallboy and Moose could be a good venue after the reception. 

Angus Robertson Mechanical Ltd, Rollforming and Coil Processing Machinery Specialists
Cocktail Reception Partner

Main Conference - Thursday 23 March

Event

Main conference

Time

8:30 am - 5:00 pm

Location

Gerald Maynard Building U

Melbourne Polytechnic Conference Centre

77 St Georges Road, Preston VIC 3072 

[Open in Google Maps]

Notes

Lunch, morning, and afternoon tea provided

Main Conference Agenda

Presenter
Key ENDUROFRAME® Developments & RoadmapPaul Jones
New Features in the ENDUROCADD® SystemSylvia Weber
Ideal Fastener Presentation

Neville Deutscher, Ideal Fastener

Morning Tea 10:30 am

TRUECORE® Steel UpdateMichelle Gissel
What are the Upcoming NCC changes and how to comply with them?Michelle Gissel
ENDUROCADD® NX - Creating Levels and WallsNazanin Azizi
Getting the Most out of EndurocademyKelly Watts

Lunch 12:30 pm

How to generate first rate site documentation for easy on-site installation

Sylvia Weber

Glenn Braybon, Blue Line Detailing

Rebecca Kelly, RA Kelly Detailing

Dael Griffiths, Steel Frame Solutions

Jeremy Mortensen, McHugh Steel

Personalise Layouts Templates - How to Create Professional Customised LayoutsNazanin Azizi
Case Study - How to effectively outsource detailingSana Ullah, Ezequote

Afternoon tea ~3 pm

Case Study - IFC and BIM integrationMitchell Crisp, Ultimate Steel Frames
The importance of quality fasteners in LGS framingNeville Deutscher, Ideal Fasteners
Developments in framing accessories - what is available?Warren Tharle

Conference Dinner - Thursday 23 March

Event

Dinner

Time

6:30 pm - 10:30 pm

Location

Oliva Social

102 - 104 High St, Preston, VIC, 3072

[Open in Google Maps]

Ezequote, your advantage
Conference Dinner Partner

Detailing Masterclass - Friday 24 March

Event

ENDUROCADD® Software Detailing Masterclass

Time

8:30 am - 12:30 pm

Location

Auditorium Building U

Melbourne Polytechnic Conference Centre

77 St Georges Road, Preston VIC 3072 

[Open in Google Maps]

Important Notes

If you want to follow along on ENDUROCADD® Software:

  • Please bring a laptop along with the latest version of ENDUROCADD® NX and ENDUROCADD® Software pre-installed.
  • Make sure your laptop is fully charged. Power points will be limited!

Bring a notepad and pen.

Morning tea and light lunch provided.

Detailing Masterclass Agenda Presenter
Joist Hangers - How to detail and manufacture them Kelly Watts
How to use ENDUROCADD NX Levels; Walls; Openings; Posts and Beams Nazanin Azizi

Morning Tea 10:30 pm

How to design posts Mehaladevi Muthukumar
How to Connect trusses to non-load bearing walls Mehaladevi Muthukumar
Top tips to improve detailing productivity Sylvia Weber
Applications for Hip Type 3 Chian Chee Choo

Lunch 12:30 pm

Manufacturing Masterclass - Friday 24 March

Event

ENDUROFRAME® Building System Manufacturing Masterclass

Time

8:30 am - 12:45 pm

Location

Steer Manufacturing

9 Capital Link Dr, Campbellfield VIC 3061

[Open in Google Maps]

Important Notes

All attendees must wear long pants, covered shoes and long sleeves.


Bus details:

  • After the Manufacturing Masterclass, the bus will go to Melbourne Airport > Conference Center > Hotel > Melbourne CBD.
  • Anybody wanting to go directly to the airport from Steer Manufacturing should take their bags with them in the morning. The bus will have a trailer to carry bags.
  • In the morning, the bus will depart the hotel at 8:15 am sharp. You must be checked out.
  • The bus will stop at the Conference Center at 8:25 am to then depart to Steer Manufacturing.
  • The bus is only for people who have pre-booked.

 

Morning tea and light lunch provided.

Manufacturing Masterclass Agenda

Presenter

ENDURO rollformer overview

Venkata Kalavacharla

Best Practices in using ENDUROHUB

Simon Steer, Steer Manufacturing

Factory Productivity Best Practices

Dennis Sutton

Track and Measure Factory productivity in ENDUROHUB

Paul Jones

Best practices for packing trusses and wall frames

Dennis Sutton

Best Practice to assemble wall panels - Part 1

Dennis Sutton

Running an ENDURO rollformer efficiently

Achal Pandit

Morning Tea 11:15 am


Best Practice to assemble wall panels - Part 2

Dennis Sutton

Stacking Trusses discussion

Simon Steer, Steer Manufacturing

ENDURO preventative maintenance procedures

Venkata Kalavacharla

Lunch 12:45 pm


Bus departs Steer Manufacturing1:30 pm


Cancellation & Refund Policy

Changes/Cancellation of a registration must be advised via email to [email protected]. Verbal changes or cancellation cannot be accepted.

Please note, accommodation charges may apply for all cancellations.

Speak to an expert about how to get started making the ENDUROFRAME® system. Insert your details below and we will call you back.

Thank you for Submitting your Enquiry. One of our Framing Experts will be in touch with you shortly.

Consider following us to get all of the latest news on the ENDUROFRAME Building System.

Facebook
LinkedIn
Twitter